Mechanical property/inspection
Universal Material Testing Machine
Application:
Used for tensile strength test per ISO 898-1, spring and torsional washer compression test.
Micro Vickers/Vickers Hardness Tester
Application:
The testing procedures of Micro Vickers/Vickers are carried out in accordance with ISO 6507 specification on the pressure head and pressure load on test piece. The hardness is calculated by optically measuring the size of the indentation (diagonal) left by the indenter.
Screw hardness requirements are based on thread shape, screw grade, etc., and are tested in accordance with the hardness design of international standards or customer-specific hardness requirements, the International regulation which are applied to screw parts as : ISO 898-1, ISO 2702, DIN7500-1, SAE J1237, SAE J81...etc.
Rockwell Hardness Tester
Application:
The Rockwell test procedure is carried out
according to the pressure head of the ISO
6508 specification, and pressure is applied to
the test piece according to the requirements
of the specification. According to the
ISO6508 specific formula, it is calculated
based on the depth of indentation left by the
indenter on the test piece.
Screw hardness requirements are based on
thread shape, screw grade, etc., and are
tested in accordance with the hardness
design of international standards or
customer-specific hardness requirements,
the International regulation which are
applied to screw parts as : ISO 898-1, ISO
2702, DIN7500-1, SAE J1237, SAE J81...etc. .
Torsional Relevant Test
Tests:
Torsional strength test, thread rolling test, plasticity test, surface finish test.
